TEC2000 Engine Flush 375ml – engine flush

TEC 2000 Engine Flush is an innovative flush for combustion engines. Perfectly removes all impurities found in piston ring grooves, oil main channels and valve lifters. TEC 2000 Engine Flush gets rid of, among others: sediment, carbon deposits, soot, and thoroughly removes used oil. One can is enough for 4-5 L of oil in cars and 5-6 L of oil in motorcycles.

When to use?

• when the engine burns oil
• vehicle blows dark or blue smoke
• If the engine burns oil and the result is dark or blue smoke, it means that the rings have resistance to work and do not touch the cylinder walls, as a result they let oil into the combustion chamber.
• oil comes out through the pneumothorax
• the oil was changed longer than 15,000. km
• the oil is older than 12 months
• the car was mostly driven around the city
• you bought a car or engine and you don't know its history
• Low or uneven compression – if the engine is having trouble starting, it may mean that the rings have become seized by carbon deposits and stuck in the ring grooves. During engine operation, combustion chamber pressure reaches the bottom of the piston, lowering the compression in the combustion chamber and blowing out the oil. It's also possible that the rings have been mechanically damaged, which happens in 1 in 10 cases.
• you can hear the valve tappets
• you see baked rings
• you feel a drop in engine power
• there will be incomplete operation of the oil main
• there is a problem with oil consumption - a large amount of impurities, including carbon deposits, can negatively affect the capacity of the oil channels, which in turn leads to a reduction in the amount of oil flow - such a situation is dangerous not only for the engine, but also for the turbocharger.

How to use
TEC 2000 Engine Flush should be used during a standard oil change.

The preparation should be added to the engine, to the old oil. The engine should reach normal operating temperature. After adding the preparation, the engine should be idle for about 10-15 minutes (the car should be in a ventilated room or outdoors to avoid exhaust gas poisoning). After this time, drain the old oil, install a new filter and top up with new oil.

If the engine has problems such as sticky rings, uneven compression, increased oil consumption or black smoke, work with the preparation should last about 25-30 minutes before the oil is changed.

A unique combination of very effective detergents and very effective lubrication allows the preparation to be used in all internal combustion engines - petrol, diesel and gas-powered. The operation is completely safe for the engine.

Capacity 375ml FOR 4-5 LITERS OF OIL

Instruction