The Gtechniq EXOv5 coating answers common problems of car users and ceramic coating enthusiasts. Excessive dirt on your car and caring for the ceramic coating will no longer be a problem for you.
Using the achievements of the flagship Gtechniq coating (Crystal Serum Ultra) and the record-breaking number of tests carried out by users and research institutes in the car detailing industry, a coating was created that limits the getting of the car's paint getting dirty and does not require complicated care (the coating is very resistant to clogging).
When applied to the paint, even of a new car, it increases the gloss and makes the paint unprecedentedly slippery. Strong hydrophobic properties and a high level of dirt resistance are the strongest points of EXO v5.
Thanks to the use of siloxane composite technology, unique in the car detailing industry, water stains and road dirt are easy to remove. It creates a glassy layer that is more durable and more resistant to road salt and cleaning chemicals than previous EXO versions.
Improved application method - only one layer of the product is enough for the above-mentioned results.
EXO v5 can be used as an additional top layer on a ceramic coating (C1, CSL) or directly on the paint as an independent dirt-repellent coating.
Which capacity should I choose?
30ml – recommended for cars with the dimensions of Audi A6, BMW 5, Mercedes E-Class or smaller
50ml – recommended for cars larger than Audi A6, BMW 5, Mercedes E-Class.
Durability up to 24 months.
Follow the advice below to get the best results.
EXOv5 can be applied as a stand-alone coating or as a top coat under Gtechniq C1 Crystal Lacquer or Gtechniq Crystal Serum Light (CSL) - we recommend using C1 or CSL as a base coat under easy-to-mark and dark varnishesEXOv5 is applied in one layer If applying over C1, EXOv5 should be applied a minimum of 4 hours but less than 12 hours after completing C1 applicationIf applying via CSL, EXOv5 should be applied at least 1 hour after CSL application.Make sure your vehicle is not exposed to direct sunlight but is above 5 degrees Celsius, is completely dry and will remain dry for at least 12 hours after applicationImportant, prepare the surface well - Wipe all surfaces with Gtechniq Panel Wipe (apply Panel Wipe directly to the cloth, not directly to the panel) - if you are applying on newly applied C1 or CSL, this step is not requiredShake the bottle well and wear glovesPrime the applicator filled with AP2 Ultra Soft Foam evenly with a large amount of the product so that the pad is saturatedApply using the included applicator in overlapping strokes, e.g. in circular motions, on an area of approximately 60 cm x 60 cm. Wait 1 to 2 minutes after applying to the area and buff with a microfiber cloth, then another to remove any smudges and leave the surface slick. Only one layer of product is required.Allow the coating to cure for at least 12 hours before exposing it to moistureAfter application, we recommend not washing your car for at least 7 daysStore in a cool, dry placeOnce opened, use within 3 months, if unopened, use within 12 monthsWe do not recommend using other water-repellent products on EXO v5 (waxes, sealants, etc.)Capacity 50ml
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.